![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-231.png)
Chapter 11 Wi-Fi Screens
ZyWALL 2WG User’s Guide
231
11.3.1 No Security
"
If you do not enable any wireless security on your ZyWALL, your network is
accessible to any wireless networking device within range.
Figure 141
WIRELESS > Wi-Fi > Security: None
The following table describes the wireless LAN security labels in this screen.
11.3.2 Static WEP
Static WEP provides a mechanism for encrypting data using encryption keys. Both the AP and
the wireless stations must use the same WEP key to encrypt and decrypt data.
Your ZyWALL allows you to configure up to four 64-bit, 128-bit or 152-bit WEP keys, but
only one key can be used at any one time.
In order to configure and enable WEP encryption, click
WIRELESS > Wi-Fi
> Security >
Edit
.
Security Mode This field displays the security mode this security profile uses.
Action
Click the edit icon
to configure security settings for that profile.
Click the reset default icon to clear all user-entered configuration information and
return the security profile to its factory defaults.
Table 58
WIRELESS > Wi-Fi > Security (continued)
LABEL
DESCRIPTION
Table 59
WIRELESS > Wi-Fi > Security: None
LABEL
DESCRIPTION
Name
Type a name (up to 32 printable 7-bit ASCII characters) to identify this security profile.
Security Mode Select
None
to allow wireless clients to communicate with the access points without
any data encryption.
Apply
Click
Apply
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving.