![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-426.png)
Chapter 22 DNS Screens
ZyWALL 2WG User’s Guide
426
The following table describes the labels in this screen.
22.2.2 The Insert Name Server Record Screen
Click
Insert
in the
System
screen to open this screen. Use this screen to insert a name server
record.
Figure 264
ADVANCED > DNS > Insert (Name Server Record)
Table 135
ADVANCED > DNS > Add (Address Record)
LABEL
DESCRIPTION
FQDN
Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a
host name and continues all the way up to the top-level domain name. For
example, www.zyxel.com.tw is a fully qualified domain name, where “www” is the
host, “zyxel” is the second-level domain, and “com.tw” is the top level domain.
IP Address
If this entry is for one of the WAN ports on a ZyWALL with multiple WAN ports,
select
WAN Interface
and select WAN 1 or WAN 2 from the drop-down list box.
If this entry is for the WAN port on a ZyWALL with a single WAN port, select
WAN
Interface
.
For entries that are not for the WAN port(s), select
Custom
and enter the IP
address of the host in dotted decimal notation.
Enable Wildcard
Select the check box to enable DNS wildcard.
Apply
Click
Apply
to save your changes back to the ZyWALL.
Cancel
Click
Cancel
to exit this screen without saving.