![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-512.png)
Chapter 28 Maintenance Screens
ZyWALL 2WG User’s Guide
512
28.4.1 Time Server Synchronization Example
Click the
Synchronize Now
button to get the time and date from the predefined time server or
the time server you specified in the
Time Server Address
field.
When the
System Time and Date Synchronization in Process
screen appears, wait up to one
minute.
Figure 311
Synchronization in Process
Click the
Return
button to go back to the
Time and Date
screen after the time and date is
updated successfully.
Figure 312
Synchronization is Successful
If the update was not successful, the following screen appears. Click
Return
to go back to the
Time and Date
screen.
End Date
Configure the day and time when Daylight Saving Time ends if you selected
Enable Daylight Saving
. The
o'clock
field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November.
Each time zone in the United States stops using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select
First
,
Sunday
,
November
and type 2 in the
o'clock
field.
Daylight Saving Time ends in the European Union on the last Sunday of October.
All of the time zones in the European Union stop using Daylight Saving Time at
the same moment (1 A.M. GMT or UTC). So in the European Union you would
select
Last
,
Sunday
,
October
. The time you type in the
o'clock
field depends
on your time zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Apply
Click
Apply
to save your changes back to the ZyWALL.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 184
MAINTENANCE > Time and Date (continued)
LABEL
DESCRIPTION