![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-235.png)
Chapter 11 Wi-Fi Screens
ZyWALL 2WG User’s Guide
235
11.3.5 WPA, WPA2, WPA2-MIX
Click
WIRELESS > Wi-Fi
> Security > Edit
. Select
WPA
,
WPA2
or
WPA2-MIX
from the
Security Mode
list.
Figure 145
WIRELESS > Wi-Fi > Security: WPA, WPA2 or WPA2-MIX
The following table describes the labels in this screen.
Table 63
WIRELESS > Wi-Fi > Security: WPA, WPA2 or WPA2-MIX
LABEL
DESCRIPTION
Name
Type a name to identify this security profile.
Security Mode
Select
WPA
,
WPA2
or
WPA2-MIX
from the drop-down list.
ReAuthentication
Timer
Specify how often wireless clients have to resend user names and passwords in
order to stay connected. Enter a time interval between 600 and 65535 seconds.
If wireless client authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout
The ZyWALL automatically disconnects a wireless client from the wireless network
after a period of inactivity. The wireless client needs to send the username and
password again before it can use the wireless network again. Some wireless
clients may prompt users for a username and password; other clients may use
saved login credentials. In either case, there is usually a short delay while the
wireless client logs in to the wireless network again.
This value is usually smaller when the wireless network is keeping track of how
much time each wireless client is connected to the wireless network (for example,
using an authentication server). If the wireless network is not keeping track of this
information, you can usually set this value higher to reduce the number of delays
caused by logging in again.
Enter a time interval between 600 and 65535 seconds.
Group Key
Update Timer
The
Group Key Update Timer
is the rate at which the AP sends a new group key
out to all clients. The re-keying process is the WPA equivalent of automatically
changing the WEP key for an AP and all stations in a WLAN on a periodic basis.
Setting of the
Group Key Update Timer
is also supported in
WPA(2)-PSK
mode.
PMK Cache
This field is available only when you select
WPA2
or
WPA2-MIX
.
When a wireless client moves from one AP’s coverage area to another, it performs
an authentication procedure (exchanging security information) with the new AP.
Instead of re-authenticating a client each time it returns to the AP’s coverage area,
which can cause delays to time-sensitive applications, the AP and the client can
store (or “cache”) and use information about their previous authentication.
Select
Enable
to allow PMK (Pairwise Master Key) caching, or
Disable
to switch
this feature off.