![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-445.png)
Chapter 23 Remote Management Screens
ZyWALL 2WG User’s Guide
445
The following table describes the labels in this screen.
23.6 The Telnet Screen
You can use Telnet to access the ZyWALL’s SMT or command line interface. Specify which
interfaces allow Telnet access and from which IP address the access can come.
Click
ADVANCED
>
REMOTE MGMT
>
TELNET
to open the following screen. Use this
screen to specify which interfaces allow Telnet access and from which IP address the access
can come.
"
It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.
Figure 284
ADVANCED > REMOTE MGMT > Telnet
Table 141
ADVANCED > REMOTE MGMT > SSH
LABEL
DESCRIPTION
Server Host Key
Select the certificate whose corresponding private key is to be used to identify the
ZyWALL for SSH connections. You must have certificates already configured in the
My Certificates
screen (Click
My Certificates
and see
for
details).
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyWALL using
this service.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select
All
to allow any computer to access the ZyWALL using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.