![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-482.png)
Chapter 27 Logs Screens
ZyWALL 2WG User’s Guide
482
Figure 303
LOGS > Traffic Statistics
"
Enabling the ZyWALL’s reporting function decreases the overall throughput by
about 1 Mbps.
The following table describes the labels in this screen.
Table 155
LOGS > Traffic Statistics
LABEL
DESCRIPTION
Collect
Statistics
Select the check box and click
Apply
to have the ZyWALL record report data.
Send Raw
Traffic Statistics
to Syslog
Server for
Analysis
Select the check box and click
Apply
to have the ZyWALL send unprocessed traffic
statistics to a syslog server for analysis.
You must have the syslog server already configured in the
Log Settings
screen.
Apply
Click
Apply
to save your changes to the ZyWALL.
Reset
Click
Reset
to begin configuring this screen afresh.
Interface
Select on which interface (
LAN
,
DMZ
or
WLAN
) the logs will be collected. The logs
on the DMZ, LAN or WLAN IP alias 1 and 2 are also recorded.
Report Type
Use the drop-down list box to select the type of reports to display.
Web Site Hits
displays the web sites that have been visited the most often from the
LAN and how many times they have been visited.
Protocol/Port
displays the protocols or service ports that have been used the most
and the amount of traffic for the most used protocols or service ports.
Host IP Address
displays the LAN, DMZ or WLAN IP addresses to and /or from
which the most traffic has been sent and how much traffic has been sent to and from
those IP addresses.
Refresh
Click
Refresh
to update the report display. The report also refreshes automatically
when you close and reopen the screen.
Flush
Click
Flush
to discard the old report data and update the report display.