![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-517.png)
Chapter 28 Maintenance Screens
ZyWALL 2WG User’s Guide
517
28.6 The F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.bin extension, for example, "zywall.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
See
for upgrading firmware using FTP/TFTP
commands.
Click
MAINTENANCE
>
F/W UPLOAD
. Follow the instructions in this screen to upload
firmware to your ZyWALL.
1
Only upload firmware for your specific model!
Figure 316
MAINTENANCE > Firmware Upload
The following table describes the labels in this screen.
1
Do not turn off the ZyWALL while firmware upload is in progress!
After you see the
Firmware Upload in Process
screen, wait two minutes before logging into
the ZyWALL again.
Table 188
MAINTENANCE > Firmware Upload
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click
Browse ...
to find it.
Browse...
Click
Browse...
to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload
Click
Upload
to begin the upload process. This process may take up to two minutes.