![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-437.png)
Chapter 23 Remote Management Screens
ZyWALL 2WG User’s Guide
437
6b
Click
CERTIFICATES
. Find the certificate and check its
Subject
column.
CN
stands for certificate’s common name (see
for an example).
Use this procedure to have the ZyWALL use a certificate with a common name that matches
the ZyWALL’s actual IP address. You cannot use this procedure if you need to access the
WAN port and it uses a dynamically assigned IP address.
6a
Create a new certificate for the ZyWALL that uses the IP address (of the ZyWALL’s
port that you are trying to access) as the certificate’s common name. For example,
to use HTTPS to access a LAN port with IP address 192.168.1.1, create a certificate
that uses 192.168.1.1 as the common name.
6b
Go to the remote management
WWW
screen and select the newly created certificate
in the
Server Certificate
field. Click
Apply
.
23.2.1.4 Login Screen
After you accept the certificate, the ZyWALL login screen appears. The lock displayed in the
bottom right of the browser status bar denotes a secure connection.
Figure 272
Example: Lock Denoting a Secure Connection
Click
Login
and you then see the next screen.
The factory default certificate is a common default certificate for all ZyWALL models.