![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-149.png)
Chapter 6 LAN Screens
ZyWALL 2WG User’s Guide
149
Figure 94
NETWORK > LAN
The following table describes the labels in this screen.
Table 23
NETWORK > LAN
LABEL
DESCRIPTION
LAN TCP/IP
IP Address
Type the IP address of your ZyWALL in dotted decimal notation. 192.168.1.1 is the
factory default. Alternatively, click the right mouse button to copy and/or paste the
IP address.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your
ZyWALL automatically calculates the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the ZyWALL.
RIP Direction
RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The
RIP Direction
field controls
the sending and receiving of RIP packets. Select the RIP direction from
Both
/
In
Only
/
Out Only
/
None
. When set to
Both
or
Out Only
, the ZyWALL will broadcast
its routing table periodically. When set to
Both
or
In Only
, it will incorporate the RIP
information that it receives; when set to
None
, it will not send any RIP packets and
will ignore any RIP packets received.
Both
is the default.