![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-091.png)
Chapter 3 Wizard Setup
ZyWALL 2WG User’s Guide
91
3.5 VPN Wizard IKE Tunnel Setting (IKE Phase 1)
Use this screen to specify the authentication, encryption and other settings needed to negotiate
a phase 1 IKE SA.
Starting IP
Address
When the
Local Network
field is configured to
Single
, enter a (static) IP address on
the LAN behind your ZyWALL. When the
Local Network
field is configured to
Range
IP
, enter the beginning (static) IP address, in a range of computers on the LAN behind
your ZyWALL. When the
Local Network
field is configured to
Subnet
, this is a
(static) IP address on the LAN behind your ZyWALL.
Ending IP
Address/
Subnet Mask
When the
Local Network
field is configured to
Single
, this field is N/A. When the
Local Network
field is configured to
Range IP
, enter the end (static) IP address, in a
range of computers on the LAN behind your ZyWALL. When the
Local Network
field
is configured to
Subnet
, this is a subnet mask on the LAN behind your ZyWALL.
Remote
Network
Remote IP addresses must be static and correspond to the remote IPSec router's
configured local IP addresses.
Select
Single
for a single IP address. Select
Range IP
for a specific range of IP
addresses. Select
Subnet
to specify IP addresses on a network by their subnet
mask.
Starting IP
Address
When the
Remote Network
field is configured to
Single
, enter a (static) IP address
on the network behind the remote IPSec router. When the
Remote Network
field is
configured to
Range IP
, enter the beginning (static) IP address, in a range of
computers on the network behind the remote IPSec router. When the
Remote
Network
field is configured to
Subnet
, enter a (static) IP address on the network
behind the remote IPSec router
Ending IP
Address/
Subnet Mask
When the
Remote Network
field is configured to
Single
, this field is N/A. When the
Remote Network
field is configured to
Range IP
, enter the end (static) IP address, in
a range of computers on the network behind the remote IPSec router. When the
Remote Network
field is configured to
Subnet
, enter a subnet mask on the network
behind the remote IPSec router.
Back
Click
Back
to return to the previous screen.
Next
Click
Next
to continue.
Table 17
VPN Wizard: Network Setting
LABEL
DESCRIPTION