Chapter 4 Tutorial
ZyWALL 2WG User’s Guide
128
Figure 73
Tutorial Example: Bandwidth Management Summary
7
Click the
Class Setup
tab.
8
Select the
WAN1
interface and click the
Add Sub-Class
button to create a rule for VoIP
traffic.
Figure 74
Tutorial Example: Bandwidth Management Class Setup
9
Enter a descriptive name (“WAN1_VoIP” for example), the maximum bandwidth allowed
and a priority for VoIP traffic. The higher the number, the higher the priority.
10
Enable this filter and select the SIP service. Make sure you also use the
ALG
screen to
turn on the SIP ALG.
11
Leave the IP address and subnet mask fields blank, so that the filter will be applied to any
outgoing traffic through the WAN port. Click
Apply
.