Chapter 11 Wi-Fi Screens
ZyWALL 2WG User’s Guide
233
Figure 143
WIRELESS > Wi-Fi > Security: 802.1x Only
The following table describes the labels in this screen.
11.3.4 IEEE 802.1x + Static WEP
Click the
WIRELESS > Wi-Fi
> Security > Edit
. Select
8021X-Static 64
or
8021X-
Static128
in the
Security Mode
field to display the following screen.
Table 61
WIRELESS > Wi-Fi > Security: 802.1x Only
LABEL
DESCRIPTION
Name
Type a name to identify this security profile.
Security Mode
Select
8021X-Only
from the drop-down list.
ReAuthentication
Timer
Specify how often wireless clients have to resend user names and passwords in
order to stay connected. Enter a time interval between 600 and 65535 seconds.
If wireless client authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout
The ZyWALL automatically disconnects a wireless client from the wireless network
after a period of inactivity. The wireless client needs to send the username and
password again before it can use the wireless network again. Some wireless
clients may prompt users for a username and password; other clients may use
saved login credentials. In either case, there is usually a short delay while the
wireless client logs in to the wireless network again.
This value is usually smaller when the wireless network is keeping track of how
much time each wireless client is connected to the wireless network (for example,
using an authentication server). If the wireless network is not keeping track of this
information, you can usually set this value higher to reduce the number of delays
caused by logging in again.
Enter a time interval between 600 and 65535 seconds.
Authentication
Databases
Click
Local User
to go to the
Local User Database
screen where you can view
and/or edit the list of users and passwords. Click
RADIUS
to go to the
RADIUS
screen where you can configure the ZyWALL to check an external RADIUS server.
Apply
Click
Apply
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving.