Chapter 33 Internet Access
ZyWALL 2WG User’s Guide
562
Figure 351
Menu 4: Internet Access Setup (Ethernet)
The following table describes the fields in this menu.
Menu 4 - Internet Access Setup
ISP's Name= WAN_1
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Table 211
Menu 4: Internet Access Setup (Ethernet)
FIELD
DESCRIPTION
ISP’s Name
This is the descriptive name of your ISP for identification purposes.
Encapsulation
Press [SPACE BAR] and then press [ENTER] to choose
Ethernet
. The
encapsulation method influences your choices for the
IP Address
field.
Service Type
Press [SPACE BAR] and then [ENTER] to select
Standard
,
RR-Toshiba
(RoadRunner Toshiba authentication method),
RR-Manager
(RoadRunner Manager
authentication method),
RR-Telstra
or
Telia Login
. Choose a RoadRunner flavor if
your ISP is Time Warner's RoadRunner; otherwise choose
Standard
.
Note: DSL users must choose the
Standard
option only. The
My Login
,
My
Password
and
Login Server
fields are not applicable in this case.
My Login
Enter the login name given to you by your ISP.
My Password
Type your password again for confirmation.
Retype to
Confirm
Enter your password again to make sure that you have entered is correctly.
Login Server
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it does
not, then you must enter the authentication server IP address.
Relogin Every
(min)
This field is available when you select
Telia Login
in the
Service Type
field.
The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.
Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait
between logins.
IP Address
Assignment
If your ISP did not assign you a fixed IP address, press [SPACE BAR] and then
[ENTER] to select
Dynamic
, otherwise select
Static
and enter the IP address and
subnet mask in the following fields.
IP Address
Enter the (fixed) IP address assigned to you by your ISP (static IP address
assignment is selected in the previous field).
IP Subnet Mask Enter the subnet mask associated with your static IP.