Chapter 17 Authentication Server Screens
ZyWALL 2WG User’s Guide
374
The following table describes the labels in this screen.
17.3 The RADIUS Screen
Click
SECURITY
>
AUTH SERVER
>
RADIUS
to open the
RADIUS
screen. Configure
this screen to use an external RADIUS server to authenticate users.
Figure 238
SECURITY > AUTH SERVER > RADIUS
The following table describes the labels in this screen.
Table 111
SECURITY > AUTH SERVER > Local User Database
LABEL
DESCRIPTION
Active
Select this check box to enable the user profile.
User Name
Enter the user name of the user profile.
Password
Enter a password up to 31 characters long for this user profile.
Apply
Click
Apply
to save your changes back to the ZyWALL.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 112
SECURITY > AUTH SERVER > RADIUS
LABEL
DESCRIPTION
Authentication Server
Active
Select the check box to enable user authentication through an external
authentication server.
Clear the check box to enable user authentication using the local user profile
on the ZyWALL.
Server IP Address
Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number
The default port of the RADIUS server for authentication is
1812
.
You need not change this value unless your network administrator instructs
you to do so with additional information.