![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-537.png)
Chapter 30 SMT Menu 1 - General Setup
ZyWALL 2WG User’s Guide
537
30.2.1 Configuring Dynamic DNS
To configure Dynamic DNS, set the ZyWALL to router mode in menu 1 or in the
MAINTENANCE Device Mode
screen and go to
Menu 1 - General Setup
and press
[SPACE BAR]
to select
Yes
in the
Edit Dynamic DNS
field. Press
[ENTER]
to display
Menu 1.1 - Configure Dynamic DNS
(shown next).
Figure 334
Menu 1.1: Configure Dynamic DNS
Follow the instructions in the next table to configure Dynamic DNS parameters.
30.2.1.1 Editing DDNS Host
To configure a DDNS host, follow the procedure below.
1
Configure your ZyWALL as a router in menu 1 or the
MAINTENANCE Device Mode
screen.
2
Enter 1 in the main menu to open
Menu 1 - General Setup
.
3
Press
[SPACE BAR]
to select
Yes
in the
Edit Dynamic DNS
field. Press
[ENTER]
to
display
Menu 1.1 - Configure Dynamic DNS
.
4
Press
[SPACE BAR]
and then
[ENTER]
to select
Yes
in the
Edit Host
field. Press
[ENTER]
to display
Menu 1.1.1 - DDNS Host Summary
.
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.COM
Active= No
Username=
Password= ********
Edit Host= No
Press ENTER to Confirm or ESC to Cancel:
Table 196
Menu 1.1: Configure Dynamic DNS
FIELD
DESCRIPTION
Service
Provider
This is the name of your Dynamic DNS service provider.
Active
Press [SPACE BAR] to select
Yes
and then press [ENTER] to make dynamic DNS
active.
Username
Enter your user name.
Password
Enter the password assigned to you.
Edit Host
Press [SPACE BAR] and then [ENTER] to select
Yes
if you want to configure a
DDNS host.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.