![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-215.png)
Chapter 10 WLAN Screens
ZyWALL 2WG User’s Guide
215
Figure 132
NETWORK > WLAN
The following table describes the labels in this screen.
Table 50
NETWORK > WLAN
LABEL
DESCRIPTION
WLAN TCP/IP
IP Address
Type the IP address of your ZyWALL’s WLAN interface in dotted decimal notation.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Note: Make sure the IP addresses of the LAN, WAN, WLAN and
DMZ are on separate subnets.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your
ZyWALL automatically calculates the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the ZyWALL.
RIP Direction
RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The
RIP Direction
field controls
the sending and receiving of RIP packets. Select the RIP direction from
Both
/
In
Only
/
Out Only
/
None
. When set to
Both
or
Out Only
, the ZyWALL will broadcast
its routing table periodically. When set to
Both
or
In Only
, it will incorporate the RIP
information that it receives; when set to
None
, it will not send any RIP packets and
will ignore any RIP packets received.
Both
is the default.