![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-118.png)
Chapter 4 Tutorial
ZyWALL 2WG User’s Guide
118
Figure 60
Tutorial Example: NAT Port Forwarding
4.2.5 Allow WAN-to-LAN Traffic through the Firewall
By default, the ZyWALL blocks any traffic initiated from the WAN to the LAN. To have the
ZyWALL forward traffic initiated from WAN 1 to a local computer or server on the LAN, you
need to configure a firewall rule to allow it.
In this example, you create the firewall rules to allow traffic from the WAN to the following
servers on the LAN:
• Web server
• Mail server
• FTP server
Figure 61
Tutorial Example: Forwarding Incoming FTP Traffic to a Local Computer
1
Click
SECURITY > FIREWALL
.
2
Make sure the firewall is enabled and traffic from WAN 1 to the LAN is dropped.