![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-493.png)
Chapter 27 Logs Screens
ZyWALL 2WG User’s Guide
493
3G SIM authentication
failed because of no
response from SIM card.
SIM card authentication failed because the ZyWALL received a
SIM busy message three times when querying for the card
status.
3G card has no response,
card is restarted.
The card was reset due to no response from the card for a
period of time.
3G SIM card PIN code is
incorrect.
The specified PIN code does not match the inserted GSM 3G
card.
The 3G card is not
activated.
The user account of the 3G card is not activated.
3G Modem is locked.
The internal modem on the inserted 3G card is blocked.
SIM card not inserted or
damaged.
There is no SIM card in the inserted GSM 3G card or the SIM
card is damaged.
3G connection has been
dropped - %s.
The 3G connection has been dropped due to the specific
reason, such as idle timeout, manual disconnection, failure to
get an IP address, switching to WAN 1, ping check failure,
connection reset, and so on.
3G signal strength is
refreshed (%d dBm).
The ZyWALL updated the 3G network signal strength
indication.
Warning: (%IMSI% or %ESN%)
Over time budget! (budget =
%CONFIGURED_BUDGET% hours,
used = %USED_VOLUME%(2
decimals) hours).
This shows that the preconfigured time budget was exceeded.
This also displays the IMSI of the SIM card in an inserted GSM
3G card or the ESN of the inserted CDMA 3G card and the 3G
connection’s usage time in hours.
Warning: (%IMSI% or %ESN%)
Over %THRESHOLD%% of time
budget (%REMAIN_BUDGET%(2
decimals) hours remain in
%CONFIGURED_BUDGET% hours
budget).
This shows that the specified percentage of the time budget
was exceeded. This also displays the IMSI of the SIM card in
an inserted GSM 3G card or the ESN of the inserted CDMA 3G
card and the amount of time (in hours) the 3G connection can
still be used.
Warning: (%ESN% or %IMSI%)
Over data budget! (budget
=%CONFIGURED_BUDGET%(2
decimals Mbytes, used =
%USED_VOLUME%(2 decimals)
Mbytes).
This shows that the preconfigured data limit was exceeded.
The IMSI of the SIM card in an inserted GSM 3G card or the
ESN of the inserted CDMA 3G card is displayed. The amount
of data (in Mbytes) sent and/or received (depending on your
configuration) through the 3G connection is also displayed.
Warning: (%ESN% or %IMSI%)
Over %THRESHOLD%% of data
budget (%REMAIN_BUDGET%(2
decimals) Mbytes remain in
%CONFIGURED_BUDGET% Mbytes
budget).
This shows that the specified percentage of data limit was
exceeded. This also displays the IMSI of the SIM card in an
inserted GSM 3G card or the ESN of the inserted CDMA 3G
card and how much data (in Mbytes) can still be transmitted
through the 3G connection.
Table 170
UPnP Logs
LOG MESSAGE
DESCRIPTION
UPnP pass through Firewall
UPnP packets can pass through the firewall.
Table 169
3G Logs (continued)
LOG MESSAGE
DESCRIPTION