Chapter 12 Firewall Screens
ZyWALL 2WG User’s Guide
247
12.4 Firewall Default Rule (Bridge Mode)
Click
SECURITY
>
FIREWALL
to open the
Default Rule
screen.
Use this screen to configure general firewall settings when the ZyWALL is set to bridge mode.
Figure 152
SECURITY > FIREWALL > Default Rule (Bridge Mode)
The following table describes the labels in this screen.
Table 69
SECURITY > FIREWALL > Default Rule (Bridge Mode)
LABEL
DESCRIPTION
0-100%
This bar displays the percentage of the ZyWALL’s firewall rules storage space that
is currently in use. When the storage space is almost full, you should consider
deleting unnecessary firewall rules before adding more firewall rules.
Enable Firewall
Select this check box to activate the firewall. The ZyWALL performs access control
and protects against Denial of Service (DoS) attacks when the firewall is activated.
Note: When you activate the firewall, all current connections through
the ZyWALL are dropped when you apply your changes.