![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-536.png)
Chapter 30 SMT Menu 1 - General Setup
ZyWALL 2WG User’s Guide
536
Figure 333
Menu 1: General Setup (Bridge Mode)
The following table describes the fields not previously discussed (see
Device Mode
Press [SPACE BAR] and then [ENTER] to select
Router Mode
.
Edit Dynamic
DNS
Press [SPACE BAR] and then [ENTER] to select
Yes
or
No
(default). Select
Yes
to
configure
Menu 1.1 - Configure Dynamic DNS
discussed next.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Menu 1 - General Setup
System Name=
Domain Name=
Device Mode= Bridge Mode
IP Address= 0.0.0.0
Network Mask= 0.0.0.0
Gateway= 0.0.0.0
First System DNS Server
IP Address= 0.0.0.0
Second System DNS Server
IP Address= 0.0.0.0
Third System DNS Server
IP Address= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 195
Menu 1: General Setup (Bridge Mode)
FIELD
DESCRIPTION
Device Mode
Press [SPACE BAR] and then [ENTER] to select
Bridge Mode
.
IP Address
Enter the IP address of your ZyWALL in dotted decimal notation.
Network Mask
Enter the subnet mask of your ZyWALL.
Gateway
Enter the gateway IP address.
First System
DNS Server
Second System
DNS Server
Third System
DNS Server
Enter the DNS server's IP address(es) in the
IP Address
field(s) if you have the IP
address(es) of the DNS server(s).
Table 194
Menu 1: General Setup (Router Mode) (continued)
FIELD
DESCRIPTION