Chapter 15 IPSec VPN Screens
ZyWALL 2WG User’s Guide
318
Figure 201
SECURITY > VPN > VPN Rules (Manual) > Edit
The following table describes the labels in this screen.
Table 90
SECURITY > VPN > VPN Rules (Manual) > Edit
LABEL
DESCRIPTION
Property
Active
Select this check box to activate this VPN policy.
Name
Type up to 32 characters to identify this VPN policy. You may use any character,
including spaces, but the ZyWALL drops trailing spaces.
Allow NetBIOS
Traffic Through
IPSec Tunnel
This field is not available when the ZyWALL is in bridge mode.
NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that
enable a computer to find other computers. It may sometimes be necessary to
allow NetBIOS packets to pass through VPN tunnels in order to allow local
computers to find computers on the remote network and vice versa.
Select this check box to send NetBIOS packets through the VPN connection.
Local Network
Specify the IP addresses of the devices behind the ZyWALL that can use the VPN
tunnel. The local IP addresses must correspond to the remote IPSec router's
configured remote IP addresses.
Two active SAs cannot have the local and remote IP address(es) both the same.
Two active SAs can have the same local or remote IP address, but not both. You
can configure multiple SAs between the same local and remote IP addresses, as
long as only one is active at any time.