Chapter 2 Introducing the Web Configurator
ZyWALL 2WG User’s Guide
69
Table Key: A Y in a mode’s column shows that the device mode has the specified feature. The
information in this table was correct at the time of writing, although it may be subject to
change.
The following table describes the sub-menus.
Table 6
Screens Summary
LINK
TAB
FUNCTION
HOME
This screen shows the ZyWALL’s general device and network
status information. Use this screen to access the wizards,
statistics and DHCP table.
REGISTRATION Registration
Use this screen to register your ZyWALL and activate the trial
service subscriptions.
Service
Use this to manage and update the service status and license
information.
NETWORK
LAN
LAN
Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP
Use this screen to assign fixed IP addresses on the LAN.
IP Alias
Use this screen to partition your LAN interface into subnets.
Port Roles
Use this screen to change the LAN/DMZ/WLAN port roles.
BRIDGE
Bridge
Use this screen to change the bridge settings on the ZyWALL.
Port Roles
Use this screen to change the LAN/DMZ/WLAN port roles on the
ZyWALL.
WAN
General
This screen allows you to configure load balancing, route priority
and connection test.
WAN1
Use this screen to configure the WAN1 connection for Internet
access.
3G (WAN 2)
Use this screen to configure the WAN2 connection for Internet
access.
Traffic
Redirect
Use this screen to configure your traffic redirect properties and
parameters.
Dial Backup
Use this screen to configure the backup WAN dial-up connection.
DMZ
DMZ
Use this screen to configure your DMZ connection.
Static DHCP
Use this screen to assign fixed IP addresses on the DMZ.
IP Alias
Use this screen to partition your DMZ interface into subnets.
Port Roles
Use this screen to change the LAN/DMZ/WLAN port roles on the
ZyWALL.
WLAN
WLAN
Use this screen to configure your WLAN connection.
Static DHCP
Use this screen to assign fixed IP addresses on the WLAN.
IP Alias
Use this screen to partition your WLAN interface into subnets.
Port Roles
Use this screen to change the LAN/DMZ/WLAN port roles on the
ZyWALL.
WIRELESS
3G (WAN 2)
3G (WAN 2)
Use this screen to configure the WAN2 connection for Internet
access.