ZyWALL 2WG User’s Guide
507
C
H A P T E R
28
Maintenance Screens
28.1 Overview
This chapter displays information on the maintenance screens. The maintenance screens can
help you view system information, upload new firmware, manage configuration and restart
your ZyWALL.
28.1.1 What You Can Do in the Maintenance Screens
• Use the
General Setup
screen (
) to configure administrative and
system-related information.
• Use the
Password
screen (
) to change the ZyWALL’s
management password.
• Use the
Time and Date
screen (
) to configure the ZyWALL’s
time based on your local time zone.
• Use the
Device Mode
screen (
) to configure the ZyWALL as a
router or a bridge.
• Use the
F/W Upload
screen (
) to upgrade the ZyWALL’s
firmware.
• Use the
Backup and Restore
screen (
) to backup and restore the
ZyWALL configuration file and to reset the device to factory settings.
• Use the
Restart
screen (
) to reboot the ZyWALL device.
• Use the
Diagnostics
screen (
) to have the ZyWALL generate and
send diagnostic files by e-mail and/or the console port.
28.2 The General Setup Screen
General Setup
contains administrative and system-related information.
System Name
is for
identification purposes. However, because some ISPs check this name you should enter your
computer's "Computer Name".
• In Windows 95/98 click
Start
,
Settings
,
Control Panel
,
Network
. Click the Identification
tab, note the entry for the
Computer Name
field and enter it as the
System Name
.
• In Windows 2000, click
Start
,
Settings
,
Control Panel
and then double-click
System
.
Click the
Network Identification
tab and then the
Properties
button. Note the entry for
the
Computer name
field and enter it as the
System Name
.