![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-446.png)
Chapter 23 Remote Management Screens
ZyWALL 2WG User’s Guide
446
The following table describes the labels in this screen.
23.7 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the ZyWALL’s firmware
and configuration files, please see the User’s Guide chapter on firmware and configuration file
maintenance
for details. To use this feature, your computer must have an FTP client.
To change your ZyWALL’s FTP settings, click
ADVANCED
>
REMOTE MGMT
>
FTP
.
The screen appears as shown. Use this screen to specify which interfaces allow FTP access
and from which IP address the access can come.
"
It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.
Figure 285
ADVANCED > REMOTE MGMT > FTP
Table 142
ADVANCED > REMOTE MGMT > Telnet
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyWALL using
this service.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select
All
to allow any computer to access the ZyWALL using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.