![background image](/i/zyxel/144701/zyxel-zywall-2wg-ee/h/zyxel-zywall-2wg-ee-229.png)
Chapter 11 Wi-Fi Screens
ZyWALL 2WG User’s Guide
229
The following table describes the labels in this screen.
11.3 The Wireless Security Screen
Click
WIRELESS > Wi-Fi > Security
to open the
Security
screen. Use this screen to create
security profiles. A security profile is a group of configuration settings which can be assigned
to an SSID profile in the
Wireless Card
screen.
The screen changes when you configure a security profile and varies according to the security
modes you select.
The following table describes the security modes you can configure.
Table 56
WIRELESS > Wi-Fi > Wireless Card: SSID Profile
LABEL
DESCRIPTION
Name
Enter a name (up to 32 printable 7-bit ASCII characters) identifying this
profile.
SSID
When a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
Hide SSID
Select
Disable
if you want the ZyWALL to broadcast this SSID (a wireless
client scanning for an AP will find this SSID). Alternatively, select
Enable
to
have the ZyWALL hide this SSID (a wireless client scanning for an AP will not
find this SSID).
Security
Select a security profile to use with this SSID profile. See
for more information.
RADIUS
This displays
N/A
if the security profile you selected does not use RADIUS
for more information.
This displays
Radius Configuration
if you select a security profile that uses
RADIUS authentication. Click
Radius Configuration
to go to the
RADIUS
screen where you can view and/or change the RADIUS settings.
See
Enable MAC Filtering
Select
Enable
from the drop down list box to activate MAC address filtering.
Apply
Click
Apply
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving.
Table 57
Security Modes
SECURITY MODE
DESCRIPTION
None
Select this to have no data encryption.
WEP
Select this to use WEP encryption.
802.1x-Only
Select this to use 802.1x authentication with no data encryption.
802.1x-Static64
Select this to use 802.1x authentication with a static 64bit WEP key and an
authentication server.
802.1x-Static128
Select this to use 802.1x authentication with a static 128bit WEP key and
an authentication server.
WPA
Select this to use WPA.
WPA-PSK
Select this to use WPA with a pre-shared key.
WPA2
Select this to use WPA2.