57
4.
Highlight the desired properties to be included in the email alert message and
click the
Add
button. It will appear in the Selected Properties column. To
remove it, simply highlight it and click the
Remove
button.
For convenience, four pre-populated lists of properties are available by clicking the
Load From
button. The choices are: Standard, Long List, Toners and Toner
Details. Once selected, you will notice that the properties associated with a pre-
populated list are alr
eady entered into the “Selected P
roperties
”
column.
Don’t
forget to click
Save
to save your settings.
Testing The Email Alert Configuration
For convenience, you can click the
Process Alerts Now
button to make sure
everything is configured properly. PSV will process the alert and send an email
message to the assigned recipient.
Note:
the “Process Alerts Now” function is system wide and not tied to a
particular device or group. Therefore, if you have a large number of devices in
your network, it may take an extended period of time to scan your entire fleet of
devices and send the alert email.