70
2.
Select
Supported Printers from all subnets in database
from the drop
down box
3.
Click the
Inspect Devices from Database
button
PSV provides a list of all supported devices in its database. In the example above,
3 devices are available to change from Dynamic to Static. PSV also identifies the
groups that do not have the required attributes configured. Click “Add Attributes”
to configure those groups.
4.
Select the desired devices by checking the appropriate box in the
Configure
column and click the
Configure Selected Printers
button.
If the devices are on the network and on-line, the method of IP Address
assignment will be changed from Dynamic to Static.
Note: to change the devices back to Dynamic IP address assignment, you must
use a different procedure described in the next section.