74
Note
: Current configuration of the device is retrieved from the device’s internal
web page. PSV will display “Dynamic IP” if the current IP address assignment
method is set to dynamic. PSV also displays Desired Static Address, Desired
Subnet Mask and Desired Default Gateway which are all retrieved from the group
attributes that were entered previously.
If the group associated with the subnet does not have values for these attributes,
default values for the desired settings will be populated from those specified in the
devices internal web page.
18.
Click the
Get Configuration
button again to verify the IP Address
was successfully changed
The current Configuration method will be displayed as Static IP.
19.
To undo the Static method and return to Dynamic, click the
Change to
Dynamic IP
button