78
3.
Click
Start
. PSV will search for supported Oki devices on the local subnet
4.
Select the desired device from the “Address” drop down
box
–
Only one device
can be configured at a time.
5.
Enter the password for the web page on the physical device if it has been
changed from the factory default password. If the default password has not
been changed from the factory default, leave the password field blank and PSV
will automatically enter the default password
6.
Click the
Get Configuration
button
Desired Static IP Address, Desired Subnet Mask and Desired Default Gateway
values are retrieved from user attributes associated with the printer group that
was set up earlier. All values are read only and cannot be changed by the
technician.
7.
Click the
Update
button to change the IP address