ENGLISH

^

 3t

How to Smoothly Join a New Scene to

a Previously Recorded Scene

(Camera Search Function)

■  How to Add a New Scene at the End of a

Previously Recorded Scene

The following operation steps assure smooth scene-to- 
scene transitions.

In the Recording Pause Mode:

1

  Keep pressing the [◄◄] Button (or the

[►►] Button) for more than 1 second to

search for the point where the new

recording is to be joined, and release the

button as soon as this point is found.

O When keeping the [◄◄] Button pressed:

•The Indication “<l<l” appears on the LCD 

Monitor.

•The scene is played back in reverse direction 

at 3 times normal speed. (SP Mode)

0 When keeping the [►►] Button pressed:

•The Indication “O” appears on the LCD 

Monitor.

•The scene is played back in forward direction 

at normal speed.

2

  Press the Start/Stop Button.

• You have started recording the new scene which 

is smoothly joined to the previously recorded 

scene.

■  If You Have Taken out the video cassette

After Recording the Last Scene:

Reinsert the video cassette. Press the [VCR/CAMERA] 
Button so that the “VCR” Indication Lamp lights, and 

then perform the above operation step 1.
After you have located the tape position at which the 
new recording is to be joined, press the [VCR/CAMERA] 
Button so that the “CAMERA” Indication Lamp lights. 

Next, perform the above operation step 2 to start 
recording the new scene.

T 

LVitif B 

f#a i ft

1 

[ ◄ ◄ ]  ffl [►►] ii) 

im,

(sPKIi?)

0 f ia»m*sf±fki:

• itSIIP./SSilltSd’Htbil “!>” fa/So

2 

iSStart/Stopiio

m

 [VCR/CAMERA] M, ft “VCR” igSt

tsKts, 

i „

g®B»idii®iiW6«ia/i.fcl^i«ft,lfe[VCR/CAMERAl

ia, ft “CAMERA” 

,

40