How to Record with Manual White

Balance Adjustment

Notes:

1

.

Under weak illumination, precise Manual White 
Balance Adjustment may not be possible. In this 

case, record in the “AUTO” Mode.

2.  If an additional light source with low colour 

temperature (e.g. halogen lamp) is used momentarily 
while recording a subject with high colour temperature 
(e.g. blue sky or TV 

screen), unnatural colours

 will 

result.

3.  Once it is set, the manually adjusted white balance 

setting is maintained until the Manual White Balance 
Adjustment Mode is cancelled. However, to ensure 
optimum colour reproduction, it is recommended that 
you adjust the white balance for each new scene by 
performing the following steps.

1

Set the [AE] Dial to “MNL”.

•The “MNL” Indication appears on the LCD Monitor.
• It is also possible to set the [AE] Dial to one of the 

other positions, except “AUTO”.

2

Attach the Lens Cap.

• If there are several light sources or if the 

illumination is weak:
Remove the Lens Cap and point the Movie 

Camera at a pure white subject.

3

Keep pushing the [W • T] Zoom Lever

toward “T” until the LCD Monitor becomes

completely white.

4

Keep pressing the [W.B] Button for more

than 1 second until the “tAd” Indication Q

stops flashing.

■ To Return to Automatic White Balance Adjustment

Press the [W.B] Button to make the Indication
disappear. Or reset the [AE] Dial to “AUTO”.

[

2

]

■;±S :

ftiiaitfiiT, 

"AUTO”

2. 

in*

sgifififflfsmswptiiPTts (ii*t§) B#, 

nT-nmm

a

3. 

wisigsiKSSit» 

fi*, S7i*itftfiw©asii,

a*«»

1 

n

[AE] 

“MNL”o

•  “MNL”igf)f:ajiIK;®li,il7Sl£iiiISS±„

• 

[AE] 

“AUTO" LVifettS-EteBo

2

3  ^ 

“T” 

[W-T] itilJittalP

4  stt 

[W.B] 

i5i#fflw±, iiiij “ tAd ” 

mm 

on±rmo

■ 

0

 M g g; a 

lit fl#

® [W.B] 11, ti "

k

A" 

aES [AE] MBffiSS;

ft “AUTO”„

90