Chapter 7 Monitor
NXC5200 User’s Guide
117
7.3 Port Statistics
Use this screen to look at packet statistics for each Gigabit Ethernet port. To
access this screen, click Monitor > System Status > Port Statistics.
Figure 31
Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 28
Monitor > System Status > Port Statistics
LABEL
DESCRIPTION
Poll Interval
Enter how often you want this window to be updated automatically, and
click Set Interval.
Set Interval
Click this to set the Poll Interval the screen uses.
Stop
Click this to stop the window from updating automatically. You can start
it again by setting the Poll Interval and clicking Set Interval.
Switch to
Graphic View
Click this to display the port statistics as a line graph.
#
This field displays the port’s number in the list.
Port
This field displays the physical port number.
Status
This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the
port speed and duplex setting (Full or Half).
TxPkts
This field displays the number of packets transmitted from the NXC on
the physical port since it was last connected.
RxPkts
This field displays the number of packets received by the NXC on the
physical port since it was last connected.
Collisions
This field displays the number of collisions on the physical port since it
was last connected.