Chapter 7 Monitor
NXC5200 User’s Guide
124
The following table displays the maximum number of records shown in the report,
the byte count limit, and the hit count limit.
7.6 Session Monitor
This screen displays information about active sessions for debugging or statistical
analysis. It is not possible to manage sessions in this screen. The following
information is displayed.
• User who started the session
• Protocol or service port used
• Source address
• Destination address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all the active sessions by user, service, source IP address, or
destination IP address. You can also filter the information by user, protocol /
service or service group, source address, and/or destination address and view it
by user.
Web Site
This field displays the domain names most often visited. The NXC counts
each page viewed on a Web site as another hit. The maximum number of
domain names in this report is indicated in
.
Hits
This field displays how many hits the Web site received. The NXC counts
hits by counting HTTP GET packets. Many Web sites have HTTP GET
references to other Web sites, and the NXC counts these as hits too. The
count starts over at zero if the number of hits passes the hit count limit.
See
Table 32
Maximum Values for Reports
LABEL
DESCRIPTION
Maximum
Number of
Records
20
Byte Count
Limit
2
64
bytes; this is just less than 17 million terabytes.
Hit Count Limit 2
64
hits; this is over 1.8 x 10
19
hits.
Table 31
Monitor > System Status > Traffic Statistics (continued)
LABEL
DESCRIPTION