Chapter 10 Wireless
NXC5200 User’s Guide
165
10.3 AP Management
Use this screen to manage all of the APs connected to the NXC. Click
Configuration > Wireless > AP Management to access this screen.
Figure 63
Configuration > Wireless > AP Management
Each field is described in the following table.
Table 56
Configuration > Wireless > AP Management
LABEL
DESCRIPTION
Edit
Select an AP and click this button to edit its properties.
Remove
Select an AP and click this button to remove it from the list.
Note: If in the
Configuration > Wireless > Controller
screen
you set the
Registration Type
to
Always Accept
, then as
soon as you remove an AP from this list it reconnects.
Reboot
Select an AP and click this button to force it to restart.
#
This field is a sequential value, and it is not associated with any
interface.
IP
This field displays the IP address of the AP.
MAC Address
This field displays the MAC address of the AP.
Model
This field displays the AP’s hardware model information. It displays
“N/A” (not applicable) only when the AP disconnects from the NXC
and the information is unavailable as a result.
R1 Mode / Profile
This field displays the AP or MON profile for Radio 1.
Description
This field displays the AP’s description, which you can configure by
selecting the AP and clicking the Edit button.