Chapter 27 Addresses
NXC5200 User’s Guide
408
• RANGE - a range address is defined by a Starting IP Address and an Ending
IP Address.
• SUBNET - a network address is defined by a Network IP address and
Netmask subnet mask.
The Address screen provides a summary of all addresses in the NXC. To access
this screen, click Configuration > Object > Address > Address. Click a
column’s heading cell to sort the table entries by that column’s criteria. Click the
heading cell again to reverse the sort order.
Figure 183
Configuration > Object > Address > Address Summary
The following table describes the labels in this screen.
Table 150
Configuration > Object > Address > Address Summary
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to be able to modify the
entry’s settings.
Remove
To remove an entry, select it and click Remove. The NXC confirms you
want to remove it before doing so.
Object
Reference
Select an entry and click Object References to open a screen that
shows which settings use the entry.
#
This field is a sequential value, and it is not associated with a specific
address.
Name
This field displays the configured name of each address object.
Type
This field displays the type of each address object. “INTERFACE” means
the object uses the settings of one of the NXC’s interfaces.
Address
This field displays the IP addresses represented by each address object.
If the object’s settings are based on one of the NXC’s interfaces, the
name of the interface displays first followed by the object’s current
address settings.