Инструкция для ZYXEL NXC5200

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 7 Monitor

NXC5200 User’s Guide

120

Each field is described in the following table.

Table 30

Monitor > System Status > Interface Status

LABEL

DESCRIPTION

Interface
Status

If an Ethernet interface does not have any physical ports associated with
it, its entry is displayed in light gray text.

Name

This field displays the name of each interface. If there is a Expand icon
(plus-sign) next to the name, click this to look at the status of virtual
interfaces on top of this interface.

Port

This field displays the physical port number.

Status

This field displays the current status of each interface. The possible
values depend on what type of interface it is.

For Ethernet interfaces:

Inactive - The Ethernet interface is disabled.

Down - The Ethernet interface is enabled but not connected.

Speed / Duplex - The Ethernet interface is enabled and connected.
This field displays the port speed and duplex setting (Full or Half).

HA Status

This field displays the status of the interface in the virtual router.

Active - This interface is the master interface in the virtual router.

Stand-By - This interface is a backup interface in the virtual router.

Fault - This VRRP group is not functioning in the virtual router right now.
For example, this might happen if the interface is down.

n/a - Device HA is not active on the interface.

Zone

This field displays the zone to which the interface is assigned.

IP Addr/
Netmask

This field displays the current IP address and subnet mask assigned to
the interface. If the IP address and subnet mask are 0.0.0.0, the
interface is disabled or did not receive an IP address and subnet mask
via DHCP.

If this interface is a member of an active virtual router, this field displays
the IP address it is currently using. This is either the static IP address of
the interface (if it is the master) or the management IP address (if it is a
backup).

IP Assignment

This field displays how the interface gets its IP address.

Static - This interface has a static IP address.

DHCP Client - This interface gets its IP address from a DHCP server.

Dynamic - This is the auxiliary interface.

Services

This field lists which services the interface provides to the network. This
field displays n/a if the interface does not provide any services to the
network.

Action

Use this field to get or to update the IP address for the interface. Click
Renew to send a new DHCP request to a DHCP server. Click Connect to
try to connect the interface. If the interface cannot use one of these
ways to get or to update its IP address, this field displays n/a.