Chapter 16 IP/MAC Binding
NXC5200 User’s Guide
235
The following table describes the labels in this screen.
16.2.1 Edit IP/MAC Binding
Click Configuration > Network > IP/MAC Binding > Edit to open this screen.
Use this screen to configure an interface’s IP to MAC address binding settings.
Figure 100
Configuration > Network > IP/MAC Binding > Edit
Table 80
Configuration > Network > IP/MAC Binding > Summary
LABEL
DESCRIPTION
Edit
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
#
This field is a sequential value, and it is not associated with a specific
entry.
Status
This icon is lit when the entry is active and dimmed when the entry is
inactive.
Interface
This is the name of an interface that supports IP/MAC binding.
Number of
Binding
This field displays the interface’s total number of IP/MAC bindings and IP
addresses that the interface has assigned by DHCP.
Apply
Click Apply to
save your changes back to the NXC.