Chapter 11 Interfaces
NXC5200 User’s Guide
188
• Between the router and VLAN 3.
11.3.1 VLAN Summary
This screen lists every VLAN interface. To access this screen, click Configuration
> Network > Interface > VLAN.
Figure 79
Configuration > Network > Interface > VLAN
Each field is explained in the following table.
Table 65
Configuration > Network > Interface > VLAN
LABEL
DESCRIPTION
Add
Click this to create a new VLAN.
Edit
Double-click an entry or select it and click Edit to open a screen where you
can modify the entry’s settings.
Remove
To remove an entry, select it and click Remove. The NXC confirms you want
to remove it before doing so.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
Object
References
Select an entry and click Object References to open a screen that shows
which settings use the entry.
#
This field is a sequential value, and it is not associated with any interface.
Status
This icon is lit when the entry is active and dimmed when the entry is
inactive.
Name
This field displays the name of the interface.
IP Address
This field displays the current IP address of the interface. If the IP address is
0.0.0.0, the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address
(STATIC) or dynamically assigned (DHCP). IP addresses are always static
in virtual interfaces.
VID
For VLAN interfaces, this field displays
• the Ethernet interface on which the VLAN interface is created
• the VLAN ID
For virtual interfaces, this field is blank.
Member
This field indicates which zones the VLAN belongs to as a member.