Chapter 17 Captive Portal
NXC5200 User’s Guide
243
17.2.2 Auth. Policy Add/Edit
This screen allows you to add authentication policies to captive portal interception.
Click the Add or Edit button (for an existing policy) in the Authentication Policy
Summary table on the Captive Portal screen to access this screen.
Figure 106
Configuration > Captive Portal > Auth. Policy Add/Edit
The following table describes the labels in this screen.
OK
Click OK to save your changes back to the NXC.
Cancel
Click Cancel to exit this screen without saving.
Table 85
Configuration > Captive Portal > Add Exceptional Services (continued)
LABEL
DESCRIPTION
Table 86
Configuration > Captive Portal > Auth. Policy Add/Edit
LABEL
DESCRIPTION
Create New
Object
Select an object (SSID Profile, Address, or Service) from the list to create
a new one. You can then use the object with the authentication policy
rule. For example, if you create a new SSID Profile called ‘CoffeeBar’,
then you can select it immediately from the SSID Profile item in the
Add Authentication Services screen.
Enable Policy
Select this to enable the new authentication policy. You can later edit the
authentication policy and deselect it if you want to disable it.
Description
Enter an optional description of the authentication policy. You can enter
up to 60 characters.