Chapter 25 AP Profile
NXC5200 User’s Guide
397
25.3.2.1 Add/Edit Security Profile
This screen allows you to create a new security profile or edit an existing one. To
access this screen, click the Add button or select a security profile from the list
and click the Edit button.
Note: This screen’s options change based on the Security Mode selected. Only the
default screen is displayed here.
Figure 177
SSID > Security ProfileAdd/Edit Security Profile
The following table describes the labels in this screen.
Table 145
SSID > Security Profile > Add/Edit Security Profile
LABEL
DESCRIPTION
Profile Name
Enter up to 31 alphanumeric characters for the profile name. This
name is only visible in the Web Configurator and is only for
management purposes. Spaces and underscores are allowed.
Security Mode
Select a security mode from the list: wep, wpa, wpa2, or wpa2-
mix.
802.1X
Select this to enable 802.1x secure authentication.
Radius Server
Type
Select internal to use the NXC’s internal authentication database, or
external to use an external RADIUS server for authentication.
Primary /
Secondary Radius
Server Activate
Select this to have the NXC use the specified RADIUS server.
Radius Server IP
Address
Enter the IP address of the RADIUS server to be used for
authentication.
Radius Server
Port
Enter the port number of the RADIUS server to be used for
authentication.
Radius Server
Secret
Enter the shared secret password of the RADIUS server to be used for
authentication.