Chapter 7 Monitor
NXC5200 User’s Guide
134
The following table describes the labels in this screen.
7.12 Detected Device
Use this screen to view the wireless devices passively detected by the NXC. Click
Monitor > Wireless > Rogue AP > Detected Device to access this screen.
Note: At least one of the APs connected to the NXC must be set to
Monitor
mode in
order to detect other wireless devices in its vicinity.
Figure 43
Monitor > Wireless > Rogue AP > Detected Device
The following table describes the labels in this screen.
Table 41
Monitor > Wireless > Station List
LABEL
DESCRIPTION
#
This is the station’s index number in this list.
MAC Address
This is the station’s MAC address.
Associated AP
This indicates the AP through which the station is connected to the
network.
SSID Name
This indicates the name of the wireless network to which the station is
connected. A single AP can have multiple SSIDs or networks.
Security Mode
This indicates which secure encryption methods is being used by the
station to connect to the network.
Association
Time
This indicates how long the station has been associated with the AP.
Refresh
Click this to refresh the items displayed on this page.
Table 42
Monitor > Wireless > Rogue AP > Detected Device
LABEL
DESCRIPTION
Mark as Rogue
AP
Click this button to mark the selected AP as a rogue AP. A rogue AP can
be contained in the Configuration > Wireless > MON Mode screen
(
Mark as
Friendly AP
Click this button to mark the selected AP as a friendly AP. For more on
managing friendly APs, see the Configuration > Wireless > MON
Mode screen (
).
#
This is the station’s index number in this list.