Chapter 33 System
NXC5200 User’s Guide
465
To change your NXC’s time based on your local time zone and date, click
Configuration > System > Date/Time. The screen displays as shown. You can
manually set the NXC’s time and date or have the NXC get the date and time from
a time server.
Figure 211
Configuration > System > Date/Time
The following table describes the labels in this screen.
Table 176
Configuration > System > Date/Time
LABEL
DESCRIPTION
Current Time and
Date
Current Time
This field displays the present time of your NXC.
Current Date
This field displays the present date of your NXC.
Time and Date
Setup
Manual
Select this radio button to enter the time and date manually. If you
configure a new time and date, time zone and daylight saving at the
same time, the time zone and daylight saving will affect the new time
and date you entered. When you enter the time settings manually, the
NXC uses the new setting once you click Apply.
New Time (hh-
mm-ss)
This field displays the last updated time from the time server or the
last time configured manually.
When you set Time and Date Setup to Manual, enter the new time
in this field and then click Apply.