Chapter 11 Interfaces
NXC5200 User’s Guide
185
11.2.2 Object References
When a configuration screen includes an Object References icon, select a
configuration object and click Object References to open the Object
References screen. This screen displays which configuration settings reference
the selected object. The fields shown vary with the type of object.
Figure 76
Object References
Use Default
MAC Address
Select this option to have the interface use the factory assigned
default MAC address. By default, the NXC uses the factory assigned
MAC address to identify itself.
Overwrite
Default MAC
Address
Select this option to have the interface use a different MAC address.
Either enter the MAC address in the fields or click Clone by host and
enter the IP address of the device or computer whose MAC you are
cloning. Once it is successfully configured, the address will be copied
to the configuration file. It will not change unless you change the
setting or upload a different configuration file.
Related Setting
Configure
Policy Route
Click Policy Route to go to the policy route summary screen where
you can manually associate traffic with this interface.
You must manually configure a policy route to add routing and SNAT
settings for an interface with the Interface Type set to General. You
can also configure a policy route to override the default routing and
SNAT behavior for an interface with the Interface Type set to
Internal or External.
OK
Click OK to save your changes back to the NXC.
Cancel
Click Cancel to exit this screen without saving.
Table 63
Configuration > Network > Interface > Ethernet > Edit (continued)
LABEL
DESCRIPTION