Chapter 14 NAT
NXC5200 User’s Guide
218
14.2 NAT Summary
The NAT summary screen provides a summary of all NAT rules and their
configuration. In addition, this screen allows you to create new NAT rules and edit
and delete existing NAT rules. To access this screen, login to the Web Configurator
and click Configuration > Network > NAT. The following screen appears,
providing a summary of the existing NAT rules.
Figure 90
Configuration > Network > NAT
The following table describes the labels in this screen.
Table 77
Configuration > Network > NAT
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Remove
To remove an entry, select it and click Remove. The NXC confirms you
want to remove it before doing so.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
#
This field is a sequential value, and it is not associated with a specific
entry.
Status
This icon is lit when the entry is active and dimmed when the entry is
inactive.
Name
This field displays the name of the entry.
Mapping Type
This field displays what kind of NAT this entry performs: Virtual Server,
1:1 NAT, or Many 1:1 NAT.
Interface
This field displays the interface on which packets for the NAT entry are
received.
Original IP
This field displays the original destination IP address (or address object)
of traffic that matches this NAT entry. It displays any if there is no
restriction on the original destination IP address.
Mapped IP
This field displays the new destination IP address for the packet.
Protocol
This field displays the service used by the packets for this NAT entry. It
displays any if there is no restriction on the services.