Appendix A Log Descriptions
NXC5200 User’s Guide
603
Table 230
WLAN Logs
LOG MESSAGE
DESCRIPTION
Wlan %s is enabled.
The WLAN (IEEE 802.11 b and or g) feature has been turned
on. %s is the slot number where the WLAN card is or can be
installed.
Wlan %s is disabled.
The WLAN (IEEE 802.11 b and or g) feature has been turned
off. %s is the slot number where the WLAN card is or can be
installed.
Wlan %s has been
configured.
The WLAN (IEEE 802.11 b and or g) feature’s configuration
has been changed. %s is the slot number where the WLAN
card is or can be installed.
Interface %s has been
configured.
The configuration of the specified WLAN interface (%s) has
been changed.
Interface %s has been
deleted.
The specified WLAN interface (%s) has been removed.
Create interface %s
has failed. Wlan
device does not exist.
The wireless device failed to create the specified WLAN
interface (%s). Remove the wireless device and reinstall it.
System internal error.
No 802.1X or WPA
enabled!
IEEE 802.1x or WPA is not enabled.
System internal error.
Error configuring WPA
state!
The NXC was not able to configure the wireless device to use
WPA. Remove the wireless device and reinstall it.
System internal error.
Error enabling WPA/
802.1X!
The NXC was not able to enable WPA/IEEE 802.1X.
Station has
associated. Interface:
%s, MAC: %s.
A wireless client with the specified MAC address (second %s)
associated with the specified WLAN interface (first %s).
WPA or WPA2 enterprise
EAP timeout.
Interface: %s, MAC:
%s.
There was an EAP timeout for a wireless client connected to
the specified WLAN interface (first %s). The MAC address of
the wireless client is listed (second %s).
Station association
has failed. Maximum
associations have
reached the maximum
number. Interface: %s,
MAC: %s.
A wireless client with the specified MAC address (second %s)
failed to connect to the specified WLAN interface (first %s)
because the WLAN interface already has its maximum
number of wireless clients.
WPA authentication has
failed. Interface: %s,
MAC: %s.
A wireless client used an incorrect WPA key and thus failed to
connect to the specified WLAN interface (first %s). The MAC
address of the wireless client is listed (second %s).
Incorrect password for
WPA or WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
A wireless client used an incorrect WPA or WPA2 user
password and failed authentication by the NXC’s local user
database while trying to connect to the specified WLAN
interface (first %s). The MAC address of the wireless client is
listed (second %s).