Chapter 11 Interfaces
NXC5200 User’s Guide
179
Figure 74
Configuration > Network > Interface > Ethernet
Each field is described in the following table.
Table 62
Configuration > Network > Interface > Ethernet
LABEL
DESCRIPTION
Edit
Double-click an entry or select it and click Edit to open a screen
where you can modify the entry’s settings.
Activate
To turn on an interface, select it and click Activate.
Inactivate
To turn off an interface, select it and click Inactivate.
Object References Select an entry and click Object References to open a screen that
shows which settings use the entry.
#
This field is a sequential value, and it is not associated with any
interface.
Status
This icon is lit when the entry is active and dimmed when the entry is
inactive.
Name
This field displays the name of the interface.
IP Address
This field displays the current IP address of the interface. If the IP
address is 0.0.0.0, the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address
(STATIC) or dynamically assigned (DHCP). IP addresses are always
static in virtual interfaces.
Mask
This field displays the interface’s subnet mask in dot decimal notation.
PVID
This field indicates the interface’s PVID.
Apply
Click Apply to save your changes back to the NXC.
Reset
Click Reset to return the screen to its last-saved settings.