Appendix A Log Descriptions
NXC5200 User’s Guide
592
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
The device received a DHCP request through the specified
interface.
IP confliction is
detected. Send back
DHCP-NAK.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done
Clear ARP cache done.
Set manual time has
succeeded. Current
time is %s
The device date and time was changed manually.
%s is the date and time.
NTP update successful,
current time is %s
The device successfully synchronized with a NTP time server .
%s is the date and time.
NTP update failed
The device was not able to synchronize with the NTP time
server successfully.
Device is rebooted by
administrator!
An administrator restarted the device.
Insufficient memory.
Cannot allocate system memory.
Update the profile %s
has failed because of
strange server
response.
Update profile failed because the response was strange, %s is
the profile name.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update the profile %s
has succeeded.
Update profile succeeded, %s is the profile name.
Collect Diagnostic
Information has failed
- Server did not
respond.
There was an error and the diagnostics were not completed.
Collect Diagnostic
Infomation has
succeeded.
The diagnostics scripts were executed successfully.
Port %d is up!!
The specified port has it’s link up.
Port %d is down!!
The specified port has it’s link down.
Table 225
Connectivity Check Logs
LOG MESSAGE
DESCRIPTION
Can't open link_up2
Cannot recover routing status which is link-down.
Can not open %s.pid
Cannot open connectivity check process ID file.
%s: interface name
Table 224
System Logs (continued)
LOG MESSAGE
DESCRIPTION