Chapter 10 Wireless
NXC5200 User’s Guide
166
10.3.1 Edit AP List
Select an AP and click the Edit button in the Configuration > Wireless > AP
Management table to display this screen.
Figure 64
Configuration > Wireless > Edit AP List
Each field is described in the following table.
Table 57
Configuration > Wireless > Edit AP List
LABEL
DESCRIPTION
Create new
Object
Use this menu to create a new Radio or SSID object to associate
with this AP.
MAC Address
This displays the MAC address of the selected AP.
Model
This field displays the AP’s hardware model information. It displays
“N/A” (not applicable) only when the AP disconnects from the NXC
and the information is unavailable as a result.
Description
Enter a description for this AP. You can use up to 31 characters,
spaces and underscores allowed.
Radio 1 OP Mode
Select the operating mode for radio 1.
AP Mode means the AP can receive connections from wireless clients
and pass their data traffic through to the NXC to be managed (or
subsequently passed on to an upstream gateway for managing).
MON Mode means the AP monitors the broadcast area for other APs,
then passes their information on to the NXC where it can be
determined if those APs are friendly or rogue. If an AP is set to this
mode it cannot receive connections from wireless clients.