NXC5200 User’s Guide
539
C
H A P T E R
3 7
Reboot
37.1 Overview
Use this to restart the device.
37.1.1 What You Need To Know
If you applied changes in the Web configurator, these were saved automatically
and do not change when you reboot. If you made changes in the CLI, however,
you have to use the
write
command to save the configuration before you reboot.
Otherwise, the changes are lost when you reboot.
Reboot is different to reset; reset returns the device to its default configuration.
37.2 Reboot
This screen allows remote users can restart the device. To access this screen, click
Maintenance > Reboot.
Figure 255
Maintenance > Reboot
Click the Reboot button to restart the NXC. Wait a few minutes until the login
screen appears. If the login screen does not appear, type the IP address of the
device in your Web browser.
You can also use the CLI command
reboot
to restart the NXC.