Appendix A Log Descriptions
NXC5200 User’s Guide
601
Interface %s connect
failed: PAP
authentication
failed.
PAP authentication failed (the server must support PAP and
verify verify that the authentication failed, this does not
include cases where the server does not support PAP). %s:
PPP interface name.
Interface %s connect
failed: Connect
timeout.
A PPPOE connection timed out due to a lack of response from
the PPPOE server. %s: PPP interface name.
Interface %s create
failed because has no
member.
A bridge interface has no member. %s: bridge interface
name.
"Interface cellular
Application Error Code
%d\n.
The listed error code (%d) was generated due to an internal
cellular interface error.
"An error [%d]
occurred while
negotiating with the
device in %s. Please
try to remove then
insert the device.
The listed error code (%d) happened when the NXC
attempted to negotiate with the cellular device installed in (or
connected to) the listed slot (%s). Remove and reinstall the
device.
"Unable to negotiate
with the device in %s.
Please try to remove
then insert the
device.
The NXC could not negotiate with the cellular device installed
in (or connected to) the listed slot (%s). Remove and reinstall
the device.
"Unable to configure
the selected frequency
band to the device in
%s. Please try to
remove then insert the
device.
The NXC failed to set the cellular device installed in (or
connected to) the listed slot (%s) to use the frequency band
you configured. The cellular device may not support the band
or you may need to try removing and reinstalling the device.
"PIN code is required
for inteface
cellular%d. Please
check the PIN code
setting.
The PIN code configured for the listed cellular interface (%d)
is incorrect or missing.
"SIM card has been
successfully unlocked
by PUK code on
interface cellular%d.
You entered the correct PUK code and unlocked the SIM card
for the cellular device associated with the listed cellular
interface (%d).
"Incorrect PUK code of
interface cellular%d.
Please check the PUK
code setting.
You entered an incorrect PUK code so you were not able to
unlock the SIM card for the cellular device associated with the
listed cellular interface (%d).
"SIM card of interface
cellular%d in %s is
damaged or not
inserted. Please
remove the device,
then check the SIM
card.
The SIM card for the cellular device associated with the listed
cellular interface (%d) cannot be detected. The SIM card may
be missing, not inserted properly, or damaged. Remove the
device and check its SIM card. If it does not appear to be
damaged, try re-inserting the SIM card.
Table 229
Interface Logs (continued)
LOG MESSAGE
DESCRIPTION